10
D-9
Turn the thumb turn clockwise to the stop position, assuring
the latch is retracted
(See Figure 4-3)
. Release thumb turn.
You should not be able to turn the thumb turn unless you have
depressed the buttons of your newly entered combination. The
new combination is now programmed in the lock.
D-10
Replace control lock assembly and trim plate by inserting
threaded rod portion into the combination change sleeve and
turning to the right (clockwise) until trim plate is snug against
the stile of door. The DF 59 key can be removed from control
lock assembly in the vertical position only.
D-11
Before closing door, activate new combination and turn the
thumb turn to the right (clockwise) to ensure proper retraction of
the latch
(See Figure 4-4)
.
Warning
: If you can turn the thumb turn to the right (clockwise)
without pressing any combination, you are in a “0” combination
because some steps above were performed out of order. To reset
a combination, follow the above steps, but omit D-5.
Figure 4-3
Figure 4-4
Summary of Contents for SIMPLEX 3000 NARROW STILE
Page 1: ...Installation Instructions SIMPLEX 3000 NARROW STILE...
Page 15: ...13 Notes...
