Version 2014-02-28
Page 38 of 48
Operating instructions 82132/3xxx CB 30
Description
1. Press
and enter the valid master code
and
(00 = ID, X = valid 6-digit combination for the master)
2x 3x 3x
2 Press
and
2x 3x 3x
3. Enter
and
2x 2x 3x 3x
Table 43: Deleting opening delay and opening standby time
24.4
Programming the double code (P7)
The double code function allows to set the lock in such a way that two optional but different codes (different IDs) are required to
open the lock. The double code includes all operators (master, user and courier). This programming command is used to
activate or deactivate the double code.
24.4.1
Activating the double code (P7)
In order to activate the double code proceed as follows:
Description
1. Press
and enter the valid master code
and
(00 = ID, X = valid 6-digit combination for the master)
2x 3x 3x
2. Press
and
2x 2x 3x 3x
Table 44: Activating double code
The lock can be opened only as described in 10.3.
To activate the double code, at least two operators with valid codes must be created. Otherwise, an error message is
displayed during activation of the double code.
The double code must be deactivated in order to be able to activate it.
If the red LED is displayed additionally to the normal acknowledgment signal, the double code has been activated
previously and is deactivated now. To activate it again, repeat the entire procedure.
24.4.2
Deactivating double code (P7)
In order to deactivate the double code proceed as follows:
Description
1. Press
and enter the valid master code
and
(00 = ID, X = valid 6-digit combination for the master)
2x 3x 3x
2. Press
and
2x 2x 3x 3x
Table 45: Deactivating double code
The double code must be activated in order to be able to deactivate it.
If the red LED is missing during the acknowledgment signal, the double code has been deactivated previously and is
activated now. To deactivate it again, repeat the entire procedure.
