Kaba Registration 90 01
24
TM_ RegistrationUnits_201406_en.docx
5.4
Connection
5.4.1
Connection with quickwire
TM
Technology
With the innovative quickwire technology, the wiring is performed completely separately from the
electronics on the mounting plate (rear panel or spacer frame). The electronics are mounted as a unit
during commissioning. The practical click connection makes mounting simpler and means the
registration unit is quickly changed in case of repair.
In addition, it is possible to upgrade from a registration unit without a PIN to a registration unit with PIN
with no or minimal changes to wiring.
5.4.2
Connecting the Coaxial Cable
Terminal Number
Meaning
Control Unit
6
Antenna cable shield wire
AS
7
Antenna cable inner conductor
A+
5.5
Typical Maximum Reading Distance
1 = Badge, ISO 14443A
2 = Key fob, ISO 14443A
3 = Badge, LEGIC RF
4 = Badge, ISO 15693
5 = Kaba elolegic smart key, LEGIC RF
5.5.1
Reading and Writing Distance with Direct Mounting on Metal
If the registration unit is mounted directly on a metallic surface, the reading and writing distance is
approx. 10% smaller than an RFID neutral environment (wood, masonry).