7
If Selection = 01, Single Combination Mode:
1 Dial right (CW) until the symbol eC (enter Combination) appears
2 Dial the new combination as if dialing a combination to open the lock; ie, left
(CCW) to dial the first number, right (CW) to dial the second number, left (CCW) to
dial the third number
EXAMPLE: Set Combination to 30-60-90
Dial
left to the first number, 30. Stop.
Dial
right to second number, 60. Stop.
Dial
left to third number, 90. Stop.
3 Dial right (CW) briskly The new combination will be displayed two times, two digits
at a time, followed by Po (Pull out Change Key)
Note: If the correct combination is not displayed, you may pull out the change key and
the lock will allow you to reset the combination.
You must pull out the change key
while the display is still flashing
. When
EC
appears, insert the change key again and
dial the desired combination.
4 Pull out the Change Key The Change Key symbol will disappear and CC (Confirm
Combination) will appear
5 Dial the new combination once again for confirmation
6 Dial right (CW) After oP with a right arrow (oPen right) is displayed, continue
dialing to the right to retract the lock bolt The new combination is now set
If Selection = 02 or 03, Dual Combination or Super/Sub Mode:
In Dual Combination Mode: Either of the two combinations can be entered first and the
combinations may be the same
In Supervisory/Subordinate Mode: Supervisory Combination must be entered first, and the
Supervisory and Subordinate Combinations cannot be the same combination
1 Dial right (CW)until the symbol C1 (enter Combination 1) appears
2 Dial the first new combination (Supervisory Combination if operating in Super/Sub
Mode) as if dialing a combination to open the lock; ie, left (CCW) to dial the first
number, right (CW) to dial the second number, left (CCW) to dial the third number
eXaMPle: set Combination to 30-60-90
Dial
left to the first number, 30 Stop
Dial
right to second number, 60 Stop
Dial
left to third number, 90 Stop
3 Dial right (CW) briskly The new combination will be displayed two times, two
digits at a time Once the combination has been displayed, the symbol C2 (Enter
Combination 2) will appear
Note: If the correct combination is not displayed, you may pull out the Change Key and
the lock will allow you to reset the combination.
You must pull out the Change Key
while the display is still flashing.
When
C1
appears, insert the Change Key again
and dial the desired combination.
4. Dial the
second new combination (Subordinate Combination if operating in Super/
Sub Mode) as if dialing a combination to open the lock; i.e.,
left (CCW) to dial the
first number,
right (CW) to dial the second number, left (CCW) to dial the third
number.
EXAMPLE: Set Combination to 25-50-75
Dial
left to the first number, 25. Stop.
Dial
right to second number, 50. Stop.
Dial
left to third number, 75. Stop.
