9
USING THE X-10
If you have not read the section on “Dialing the X-10”, it is important that you do so
before proceeding�
SINGLE COMBINATION MODE
In this mode the X-10 functions much like a standard combination lock. It will open any time
the three-number combination is correctly dialed.
1. Dial
left (CCW) until lock is “powered”.
2. Dial the
combination in the correct manner to open the lock; i.e., left (CCW) to dial
the first number,
right (CW) to dial the second number, left (CCW) to dial the third
number.
EXAMPLE: Combination = 30-60-90
Dial
left to the first number, 30. Stop.
Dial
right to second number, 60. Stop.
Dial
left to third number, 90. Stop.
3. Dial
right (CW). After OP with a right arrow (OPen right) is displayed, continue
dialing to the right to retract the lock bolt.
Note: If at any time the dial remains stationary for more than 40 seconds, the lock will
reset (LCD will go blank) requiring the operator to redial the entire combination.
DUAL COMBINATION MODE
In this mode, two combinations must be correctly and consecutively entered to open the
lock. Either combination may be entered first; however,
the second combination must be
started within 40 seconds after the first combination is completed�
First Operator:
1 Dial left (CCW) until lock is “powered”
2 Dial the first combination in the correct manner to open the lock; ie, left (CCW) to
dial the first number, right (CW) to dial the second number, left (CCW) to dial the third
number
eXaMPle: Combination = 25-50-75
Dial
left to first number, 25 Stop
Dial
right to second number, 50 Stop
Dial
left to third number, 75 Stop
3 Dial to the right (CW) until C2 (enter Combination 2) is displayed
Second Operator:
4 Dial the second combination in the correct manner to open the lock; ie, left (CCW)
to dial the first number, right (CW) to dial the second number, left (CCW) to dial the
third number
eXaMPle: Combination = 30-60-90
Dial
left to first number, 30 Stop
Dial
right to second number, 60 Stop
Dial
left to third number, 90 Stop
