manualshive.com logo in svg

Kaadas S500-C, User Manual, Page: 17 / 24

Share
Download
Kaadas S500-C User Manual Download Page 17

How to enter master mode

Default master PIN code: 12345678

1. Touch the screen to activate lock
2. Press [*] twice, input master PIN code, and press [#] 
    to confirm.
3. Voice guide: Enter the master mode.

Change master PIN code is required immediately for menu operation.

Caution:

Change master PIN code

Access into master mode

Press [1] for user setting, then press [9] to change master PIN
code.

Enter new master PIN code (6-12 digits) and confirm with [#] key. 
Then repeat above operations. Voice prompt of “setting succeed”.

Add access date

Add user PIN code

Access into master mode

Press [1] for user setting, then press [1] to enroll user PIN code. 
Enter 2 digital user number (00-09), and confirm with [#] key.

Enter user PIN code (6-12 digits) and confirm with [#] key. Then 
repeat above operations. Voice prompt of “setting succeed”.

Add user fingerprint

Access into master mode

Press [1] for user setting, then press [2] to enroll user fingerprint. 
Enter 2 digital user number (00-99), and confirm with [#] key.

Place your finger on the fingerprint sensor, then take away your
finger after voice prompt “Remove finger and scan again”.
Repeat above steps multiple times until voice prompt “setting 
succeed”.

Summary of Contents for S500-C

























Reviews:

No comments