Mounting screw
Mounting screw
Pressure
spring
Square shaft
Connecting
cable
for mortise
Connecting
cable
for front
panel
6. Place pressure spring and square shaft in the back panel in proper order.
And insert the connecting cable of front panel into related sockets of the
back panel. Then align and insert the square shaft and mechanical key
pick into mortise holes, make the back panel fit against the door closely.
After that, tighten the 2 screws.
According to door thickness, cut the mechanical key pick into proper length.
Caution:
7. Install the batteries and the battery cover. Then install the
striker assembly to finish the installation. Please check
handle, safe handle switch and mechanical key if they are
working properly.
1. After installing the striker assembly, please check if the
lock works smoothly by opening/closing door.
2. Test if mechanical key works smoothly after installation.
Caution: