background image

RES

SET

Factory reset

6   Other functions

Inside display screen

Awaken button

Press awaken button once to wake up display screen to see outside 

situation, press awaken button again can close display screen and 

awaken button light. 

1. Display light-up time 5/10/15 seconds (default 10 seconds), 
   brightness (high, medium and low, default medium), user can set it 

   in the mobile app. 

2. Display is on by default when you press the doorbell, you can turn 
    on or turn off it in the mobile app.
3. Display screen is turn on : Outdoor click doorbell, the display and 
    awaken button light come on simultaneously, you can watch the 
    dynamic outside the door in real time though the display; touch 
    the awaken button again to turn off the display.
4. Display screen is turn off : Outdoor click doorbell, only awaken 
   button light come on, touch the awaken button, you can watch the 
   dynamic outside the door in real time though the display; touch the 
    awaken button again to turn off the display.

If you forget master PIN code, When the battery is working properly,
you can double press reset button on the back panel by a pin tool, 

then press "#" key on the keypad within 15 seconds according to the 

voice guide to confirm restoring to factory settings. After the setting 
is successful, voice prompt “The factory Settings have been restored”.

After restoring to factory settings, lock can't be locked normally and 
any fingerprint can be used to unlock. it is required to pair lock to add 

credential as soon as possible.

Factory reset button

Summary of Contents for K20 Pro Max





















Reviews: