Page 20
Changing Programmable Features
This system is compatible with both the LCD 2-way transmitter or the standard 1-way
transmitter, all system programming can be performed using either one.
To enter System Programming:
1. Turn on ignition.
2. Within 5 seconds, press the valet switch 5 times.
· The siren*/horn will provide three chirps/honks, indicating that you have entered Pro-
gramming.
3. Press the valet switch the number times equal to the System Parameter you want to
change.
· The siren*/horn will chirp/honk each time the valet switch is pressed.
4. Within 5 seconds, press the transmitter button corresponding to the desired operating
mode for
that System Parameter.
· The siren*/horn will chirp/honk to indicate the setting.
1 chirp/honk = Button 1
2 chirps/honks = Button 2
3 chirps/honks = Button 3
4 chirps/honks = Button 4
5. When you are finished, turn off the ignition to save the changes.
Some of the features should only be changed by a qualified technician.
These features are denoted with Tech.
Other feature can be changed by the user and they are denoted with User.
Default Reset
Following this procedure will set all System Programming Parameters to factory default
settings.
1. Turn on ignition.
2. Within 5 seconds, press the valet switch 5 times.
· The siren*/horn will provide three chirps/honks, indicating that you have entered Pro-
gramming.
3. Press Transmitter Button 3.
· The siren*/horn will chirp/honk 6 times indicating that the reset signal was received.
· All System Programming parameters are now set to factory default settings.
· The Valet Mode is off.
4. Turn off ignition.
Summary of Contents for K9Caller
Page 14: ...Page 14 ...
