MARK
MUTE
QUIET
RIDE
PWR
FILTER
SM
DIM
MENU
16
17
Windshield Mount
For proper installation see
page 4.
Controls Overview
Platinum100 Radar and Laser Detector
Power Input Jack
Insert small end of power cord
here. Large end plugs into 12V
outlet (page 4).
QUIET RIDE/PWR Button
PWR-Press and release to power on. Press and
hold for 3 seconds to power off (page 4).
Quiet Ride-Press and release to confirm speed
setting and enter Quiet Ride menu (pages 14-15).
Volume Control
Adjust the volume up/down
using
or
buttons.
MARK Button
Press and release to mute specific
radar/laser alerts in a location.
Press and hold to mark specific
locations for alert (pages 18-19).
MUTE Button
Press and release to mute audio for
30 seconds or the duration of the
alert. Press and hold for 3 seconds to
engage a 5-minute mute (page 15).
Speaker
Alerts delivered via
voice and tones.
FILTER/SM Button
Press and release to select level
of alert sensitivity (page 13).
Press and hold to select a
Speed Monitor setting (page 20).
DIM/MENU Button
Press and release to adjust
display brightness (page 12).
Press and hold for 3 seconds
to enter Menu mode (page 21).
Audio Jack
Allows alerts to be heard using
an in-ear 8ohm speaker with
3.5mm jack.
Mini-USB Port
Allows for future firmware updates.
To Set Preferences
Both and or buttons are used
to change settings.
DIM
MENU
Defuser Input Jack
Connect optional Laser
Defuser (page 24).
Windshield Mount Release
Press to release unit from
windshield mount.
PLAT100 _MANUAL.qxp_Layout 1 5/14/20 8:52 AM Page 14
