14
15
•
K Wide scans a little above and below the standard
range of frequencies police radar guns can use. This
is the factory default setting.
-Scans 24.026-24.285GHZ
•
K Extended scans radar frequencies further below
the standard range of speed enforcement technology
that may be used in your area now or in the future.
-Scans 23.950-24.285GHZ
Ka-Band Narrow|Wide
Select the range of police radar frequencies your K40 scans.
This feature can be customized through the Menu (page 22).
•
Ka Narrow scans the primary frequencies of police radar
guns being used.
-Scans 33.7-33.9GHZ and 34.6-34.8GHZ
and 35.4-35.6GHZ
•
Ka Wide scans the entire possible range of frequencies
police radar guns can use. This is the factory default setting.
-Scans 33.4-36.00GHZ
Ka-Band Filter
Enables filtration of Ka-Band non-police radar signals, e.g.
other radar detectors and satellite broadcast bands (factory
default off). Use in high-traffic areas. Does not affect police
radar detection range. This feature can be enabled through
the Menu (page 23).
Quiet Ride
The Quiet Ride function will automatically silence all radar
and laser alerts when traveling under a speed selection of
your choice between 5-75 mph in 5 mph increments, or 10-
120 kph in 10 kph increments.
The display greys the alert received when driving under the
chosen Quiet Ride setting.
The factory default setting for Quiet Ride is 20 mph (30 kph).
Activating/Adjusting Quiet Ride:
•
Press and release
button
to activate the Quiet
Ride menu. Voice will announce the current setting e.g.
“Quiet Ride 20”, or the current speed setting.
•
Press and release
or
button
to adjust the
speed settings on Quiet Ride. Any selected speed setting
indicates Quiet Ride is on.
•
When you have made your desired Quiet Ride speed
selection, stop scrolling and voice will announce, “Quiet
Ride Set”.
NOTE:
Locations that you have “Marked to Alert” (page 19) are unaffected by
Quiet Ride settings.
Mute Functions
The K40 provides two options to mute audio alerts (both
voice and tones):
•
Press and release
button
to mute audio for 30 sec-
onds
or the duration of the alert. Voice will announce,
“Mute On”, and display will show <<Mute On>>.
•
Press and hold
button
for three seconds to mute
audio for five minutes. Voice will announce “Extended
Mute On” and the display will show <<Ex-Mute On>>.
Press and hold MUTE button for three seconds to turn
Extended Mute off. *
* NOTE:
You will only receive new alerts as visual indications on the display
while this feature is engaged.
QUIET
RIDE
PWR
MUTE
MUTE
33.80
M-MUTE
QR 20
Ka
15
PLAT100 _MANUAL.qxp_Layout 1 5/14/20 8:52 AM Page 12