6
7
Alerts from Non-Police Signals
Your K40 system is sensitive enough to detect signals generated by
non-police sources such as automatic doors, traffic flow sensors, and
radar based safety features. To learn how to minimize non-police
alerts, please read about TRAFFIC SENSOR FILTER (below), FILTER
options (page 8), QUIET RIDE (page 10), and MARK TO MUTE
(page 11).
K-Band Filter
Your K40 system rejects alerts from most vehicles on the road
equipped with radar-based safety features, such as collision avoid-
ance. Police radar reception and detection range are unaffected by
this feature.
Traffic Sensor Filter
(factory default off)
Your K40 system can reject alerts from traffic flow sensors usually
encountered during highway driving (limited use areas). This feature
can be enabled through the Menu (page 14).
MultaRadar (MRCD/CT) Photo Radar
(factory default off)
Your K40 system is capable of alerting to MRCD/CT photo radar
devices (limited use areas). This feature can be enabled through the
Menu (page 15).
**LATE 2020 RELEASE**
Auto Volume
(factory default on)
Your K40 system will automatically reduce volume every three sec-
onds until it reaches the “Low” setting. This feature can be disabled
through the Menu (page 14).
Laser Settings
The optional Laser Defuser can be configured to one of three opera-
tional settings:
•
Gives you more time to decelerate.
•
Higher potential for jamming all the
way to the laser gun location.
•
Gives you time to reduce speed. Officer
will then be able to obtain speed to
eliminate the suspicion of “jamming”
where use of jammers is restricted.
•
For notification only. Officer will immedi-
ately obtain a speed reading on your
vehicle in this setting.
Description
Recommended Use
For as long as the Laser Defuser is re-
ceiving a police laser gun signal, it will
continuously transmit back to the gun.
This is the factory default setting.
Alert Tone: standard laser alert tone.
Upon receiving a police laser signal,
the Laser Defuser will transmit a jam-
ming signal for up to five seconds,
then switches to
Receive Only
mode
for 30 seconds.
Alert Tones: standard laser alert tone
for five seconds. Drops to a lower pitch
laser alert tone when in
Receive Only
mode.
The Laser Defuser will only detect po-
lice laser. No jamming signal will be
emitted.
Alert Tone: lower pitch laser alert tone.
•
Tone notifies you while a jamming sig-
nal is being transmitted and when
Laser Defuser changes to
Receive
Only
.
Constant
Transmit
Pulse
Transmit
Receive
Only
Manual Laser Defuser Shut Down
During a Police Laser Encounter
Press and release button
to automatically switch the Laser
Defuser(s) to
Receive Only
for 30 seconds during a laser encounter.
This gives you the option to control the duration of jamming sig-
nal being transmitted by the Laser Defusers.
MUTE
Defuser
Settings
*PLATINUM 360_200 OWNERS .qxp_Layout 1 3/23/20 3:13 PM Page 4
