K2 PUMPS SWW05002TPK Owner'S Manual Download Page 9

For Professional Technical Support call 1-844-242-2475                                                                                                                          9 

 

WARRANTY 

 

Limited Warranty 

 

WHAT THIS WARRANTY COVERS 

When used and maintained in normal use and in accordance with the 

Owner’s Manual, your K2 product is warranted 

against original defects in material and workmanship for at least one year (warranty varies depending on model; see box 
for specific warranty information) from the date of purchase (the “Warranty Period”). During the Warranty Period, K2 will 

repair or replace at no cost to you, to correct any such defect in products founds upon examination by K2 to be defective 

in materials or workmanship. 

 

Your dated receipt of purchase is required to make a warranty claim. 

 

WHAT THIS WARRANTY DOES NOT COVER 

This Warranty does not cover: 

Use of the product in a non-residential application, improper installation and/or maintenance of the product, damage due 

to misuse, acts of God, vandalism or other acts beyond control of K2, 

owner’s acts or omissions, use outside the country 

in which the product was initially purchased and resale of the product by the original owner.  This warranty does not 

cover pick up, delivery, transportation or house calls. However, if you mail your product to a K2 Sales and Service Center 

for warranty service, cost of shipping will be paid one way. This warranty does not apply to products purchased outside 

of the United States, including its territories and possessions, outside of U.S. Military Exchange and outside of Canada.  

This warranty does not cover products purchased from a party that is not an authorized retailer, dealer or distributor of 

K2 products. 

 

 

OTHER IMPORTANT TERMS 

This warranty is not transferable and may not be assigned. This Warranty shall be governed and construed under laws 

of the state of Michigan. The Warranty Period will not be extended by any replacement or repair performed under this 

Warranty. THIS WARRANTY IS THE EXCLUSIVE WARRANTY AND REMEDY PROVIDED BY K2. ALL OTHER 

WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR 

PARTICULAR PURPOSE, ARE DISCLAIMED. IN NO EVENT WILL K2 BE LIABLE FOR ANY SPECIAL, INDRECT, 

INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND OR NATURE TO OWNER OR ANY PARTY 

CLAIMING THROUGH OWNER WHETHER BASED IN CONTRACT, NEGLIGENCE, TORT, OR STRICT PRODUCTS 

LIABLITY OR ARISING FROM ANY CAUSE WHATSOEVER.  Some states do not allow for the exclusion of 

consequential damages, so the above exclusion may not apply to you. This warranty gives you 

specific

 rights.  You may 

also have others that vary from state to state. 

 

Thank you for choosing a K2 product! 

Summary of Contents for PUMPS SWW05002TPK










Reviews: