2 For Professional Technical Support call 1-844-242-2475
PERFORMANCE
Model
HP
Discharge Flow (GPH)
Max.
Lift
0 ft.
5 ft.
10 ft.
15 ft.
20 ft.
25 ft.
UTM02501K
Submersible
Utility Pump
Function
1/4
1,600
1,500
1,300
950
700
210
30 ft.
Non-
Submersible
Transfer Pump
Function
1/4
950
840
730
600
400
170
30 ft.
PRE-INSTALLATION
APPLICATION
This pump can be used as a submersible utility pump. It is suitable for draining or removing water from the
following: hot tubs, stock tanks, flooded basements, water gardens, flat roofs, pool covers, window wells.
This pump can be also used as a non-submersible transfer pump. It is suitable for draining or removing from the
following: water heaters, boats, waterbeds, clogged sinks, aquariums, wash machines, utility sinks.
WARNING: Risk of pump failure, property damage and bodily injury.
Before using this pump to drain a hot
water heater, be sure to read the manufacturer’s instructions. The water temperature in the water heater must be
cooled down to 95°F or lower before draining with this pump.
DO NOT USE THIS PUMP:
with flammable liquids or in salt-water marine areas; as a sump, sewage, or effluent
pump; to recirculate water or run continuously for fountains and water features.
MATERIALS REQUIRED (NOT INCLUDED)
SPECIFICATIONS
Power supply
115V, 60 HZ., 10 Amp Circuit minimum
Liquid Temp. Range
32 to 95°F (0- 35°C)
Discharge
3/4 in. garden hose thread
Power Cord
SJTW, 18AWG/3C, 10 ft.
3/4” Garden Hose (25 ft. max. length)
