background image

www.k2mounts.com

you may also have other rights, which may vary from state to state.  Some states do not allow the exclusion of 
limitation of incidental or consequential damage so the above limitations may not apply to you. 

The warranty and insurance is valid only for the original purchaser of the product and only if the original 
purchaser registers the purchase on-line at www.k2mounts.com or by mailing a copy of the purchase receipt 

and product warranty registration card to 

screen Mounting Brackets Inc.,

 

5 Hutton Centre Drive, Suite 830, 

Santa Ana, CA 92707

 within thirty (30) days of the date of purchase.    All damage claims against the product 

must be made within fifteen 15 days from the date of the occurrence and must be accompanied by a receipt 
for the damaged bracket or the warranty is void.   Warranty is only valid in USA and Canada.   To file a 

warranty claim please write to us at 

screen Mounting Brackets Inc.,

 

5 Hutton Centre Drive, Suite 830, Santa 

Ana, CA 92707

, within 15 days of the occurrence.   Please provide to us or have the following information 

available: 
 

a. K2Mounts bracket part number. 

 

b. The equipment that was used with the K2Mounts bracket at the time of the occurrence.

 

c. The component that was damaged during the occurrence and the extent of the damage.

 

d. The date of the occurrence.

 

e. Where you purchased the K2Mounts product.

 

f. Date you purchased the K2Mounts product.

 

g. Copy of the original receipt for the damaged product.

* Failure to perform in accordance with that bracket’s specifications sheet or product manual
** Properly installed in accordance with that bracket’s installation instruction sheet or bracket manual and only 
when mounted on approved surfaces.

K2 Mounts is a Product of TV Mounting Brackets, Inc. 

© 2006 K2Mounts.   All rights reserved.

Summary of Contents for K2-A3-S











Reviews: