WARNING:
Risk of Fire or Electric Shock
• To avoid damage, falling, electric shock or fire, do not modify the fixture or replace accessories without confirming with
the supplier first.
• Only authorized, qualified personnel should install this fixture and should follow the owner’s manual. Any improper
installation might cause failure, electric shock, fire or other injury, damage or hazard.
• Disconnect power before installation or any maintenance of the fixture.
• Do not dismantle the fixture without the supplier’s authorization.
• Do not touch the power supply when the fixture is operating.
• Thermal insulating material is not allowed to cover the fixture.
• Please keep away from the corrosive substance, and keep the fixture dry and clean.
• The external flexible cable or cord of this fixture cannot be replaced; if the cord is damaged, the fixture shall be destroyed.
• The electrical fitting must be installed by a licensed electrician.
• For use in environments where an accumulation of non-conductive dust on the fixture may be expected.
IMPORTANT:
This product must be installed in accordance with the applicable installation code by a person familiar
with the construction and operation of the product and the hazards involved.
LED LINEAR HIGH BAY PENDANT
MOUNT/SURFACE MOUNT KIT
Models: 65-497
Satco Products, Inc.
Brentwood, NY 11717
INSTALLATION
INSTALLATION AND SAFETY INSTRUCTIONS
IMPORTANT: Read before installing fixture. Retain for future reference.
© Copyright 2020 Satco Products, Inc. 3/20
1. Secure mounting bracket onto the ceiling using appropriate
hardware according to the installation surface, hardware A
and B not included.
4. Attach fixture to mounting bracket.
Installation is complete.
2. Connect wiring using knockout on
access plate. Follow Wiring Diagram
below.
3. Install side cover plates using provided
hardware C.
NOTE:
Accessories include mounting brackets and four bolts (C). Durable and practical steel construction with powder
coat finish. Fits Linear High Bay Models: 65-501, 65-502, 65-503, 65-504, 65-505, 65-506, 65-507, 65-508
WIRING DIAGRAM
Black (Line)
White (Neutral)
Green (Ground)
TO SOURCE
120-227V
120-347V
347-480V
Purple (Dim +)
Gray (Dim –)
OUT
DIMMING
IN
FIXTURE
Ceiling
Anchors
Screws
A
B
C
C
