manualshive.com logo in svg

K1EL WinKeyer3, User Manual, Page: 45 / 53

Share
Download
K1EL WinKeyer3 User Manual Download Page 45

K1EL

                                        WKUSB with WinKeyer3 User Manual 

WKUSB

 

WKUSB User Manual  

   12/20/2017                  Rev 1.0 

Page 45

 

 

Message 1 is played as the initial exchange and if the serial number needs to be resent, message 2 would be 
used. The second message pre-decrements the serial number before sending it. Both of these messages leave 
the serial number incremented after it is sent. 
 

Embedded Message Command List

 

 
It is an easy procedure to embed commands in a message. The format is the fraction bar 

DN

 (D and N sent 

together as one letter) followed by the desired command letter.  If you want to insert the DN prosign into a 
message but don’t want it to be interpreted as a command simply enter DN twice.        
Example:  

K1EL/1

 would be entered as 

K1EL//1 

 

 

Embedded message command table

 

/Bnn 

Set a beacon cycle time of nn seconds (nn=00 to 99). Put this at the beginning of a message 
to set the beacon period.

 

/Cn      

Call message in slot n (1-6), return and resume current message.

 

/D 

Decrement serial number.

 

/E

 

Toggle message banks

 

/Hn 

Set HSCW speed.  See table below for determining n.

 

/Inn 

Increase letterspacing within a message, nn is a value from 0 to 31 percent times 2.

 

/Knn 

Key transmitter for nn seconds. (nn=00 to 99)

 

/M 

Play user callsign. 

 

/N 

Play Serial Number with auto post increment. 

 

/On 

Select key output port; 1 for port 1 or 2 for port 2.

 

/P 

Pause and wait for paddle entry and then continue after one word space time. The pause is 
ended three ways 1) paddle entry 2) Press a msg PB (2-6) or 3) Press the cmd PB to cancel.

 

/Q 

Set QRSS speed. See table below for determining n.

 

/Snn   

Set a speed change within a message. (nn=WPM, 5 to 99)

 

/Un 

Turn PTT on or off. PTT is turned on when n = 1 and off when n=0.

 

/V 

Send the current supply voltage in Morse, useful for beacons.

 

/Wnn 

Wait for nn seconds. (nn=00 to 99)

 

/Xn 

Cancel speed override, for example cancel HSCW, QRSS, or /Snn speed.

 

/Yn 

Force a relative speed change up. Add 

n

 to the current WPM. n=(0-9)

 

/Zn 

Force a relative speed change down. Subtract 

n

 from the current WPM. n=(0-9)

 

/1 

Jump to message 1 

 

/2 

Jump to message 2

 

/3 

Jump to message 3 

 

/4 

Jump to message 4

 

/5 

Jump to message 5 

 

/6 

Jump to message 6 

 

AA

 

End message load immediately 

(DI-DAH-DI-DAH)

 

 

IG 

Insert ½ letterspace pad 

 

(DI-DI-DAH-DAH-DIT) 

IM

 Insert 

wordspace 

pad  

(DI-DI-DAH-DAH)

 

 
 

Rate Table 

n 

HSCW Rate 

QRSS Rate

0

 

1000 lpm (200 wpm) 

3 sec dit

1

 

1500 lpm (300 wpm) 

6 sec dit

2

 

2000 lpm (400 wpm) 

10 sec dit

3

 

3000 lpm (600 wpm) 

12 sec dit

4

 

4000 lpm (800 wpm) 

30 sec dit

5

 

6000 lpm (1200 wpm) 

60 sec dit

 

Summary of Contents for WinKeyer3






















































Reviews:

No comments