background image

KTI6319

7

 

2

 

01/17/2020

 

WARNING INFORMATION

 

This is the safety alert symbol. It is used to alert you to 
potential personal injury hazards. Obey all safety messages 
that follow this symbol to avoid possible injury or death.

 

WARNING

 

WARNING: Indicates a hazardous situation 
which,  if  not  avoided,  could  result  in  death 
or serious injury.

 

IMPORTANT: READ THESE INSTRUCTIONS BEFORE OPERATING

 

BEFORE  USING  THIS  DEVICE,  READ  THIS  MANUAL  COMPLETELY  AND  THOROUGHLY,  UNDERSTAND  ITS  OPERATING 
PROCEDURES,  SAFETY  WARNINGS  AND  MAINTENANCE  REQUIREMENTS.

 

It is the responsibility of the owner to make sure all personnel read this manual prior to using the device. It is also the responsibility of 
the device owner to keep this manual intact and in a convenient location for all to see and read. If the manual or product labels are lost 
or not legible, contact K-TOOL International for replacements. If the operator is not fluent in English, the product and safety instructions

 

shall be read to and discussed with the operator in the operator's native language by the purchaser/owner or his designee, making 
sure that the operator comprehends its contents.

 

THE NATURE OF HAZARDOUS SITUATIONS

 

WARNING

 

The use of portable automotive lifting devices is subject to certain hazards that cannot be prevented by mechanical means, but only by 
the exercise of intelligence, care, and common sense. It is therefore essential to have owners and personnel involved in the use and 
operation of the equipment who are careful, competent, trained, and qualified in the safe operation of the equipment and its proper use.

 

Examples of hazards are dropping, tipping or slipping of loads caused primarily by improperly securing loads, overloading, off- 
centered loads, use on other than hard level surfaces, and using equipment for a purpose for which it was not designed.

 

METHODS TO AVOID HAZARDOUS SITUATIONS

 

WARNING

 

• Read, study, understand and follow all instructions before operating this device.
• Inspect the jack before each use. Do not use jack if damaged, altered, modified, in poor condition, leaking hydraulic fluid, or

unstable due to loose or missing hardware or parts. Make corrections before using.

Lift only on areas of the vehicle as specified by the vehicle manufacturer.

• Wear eye protection that meets ANSI Z87.1 and OSHA standards (users and bystanders).
• Do not use jack beyond its rated capacity.
• This is a lifting device only.  Immediately after lifting, support the vehicle with appropriate means.
• No alterations shall be made to this product.
• Use only on a hard level surface.
• Do not use saddle adaptors or saddle extenders between the stock lifting saddle and the load.
• Always lower the jack slowly and carefully.
• Failure to heed these warnings may result in serious or fatal personal injury and/or property damage.

CONSEQUENCES OF NOT AVOIDING HAZARDOUS SITUATIONS

 

WARNING

 

Failure to read this manual completely and thoroughly, failure to understand its OPERATING INSTRUCTIONS, SAFETY WARNINGS, 
MAINTENANCE INSTRUCTIONS and comply with them, and failure to comply with the METHODS TO AVOID HAZARDOUS 
SITUATIONS could cause accidents resulting in serious or fatal personal injury and/or property damage.

 

WARNING: 

This product can expose you to chemicals including nickel, which is known to the State of California to cause cancer 

and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Summary of Contents for KTI63197









Reviews: