background image

12

SPECIFICATIONS

General

Frequency Range

28.000 MHz-29.700 MHz 
24.715 MHz-30.105 MHz (Programmable)

Frequency Band

A/B/C/D/E/F

Channel

60 channels (programmable) in each band

Frequency Control

Phase-Locked-Loop Synthesizer

Frequency Step

10 Hz  100 Hz  1 KHz  10 KHz

Frequency Tolerance

0.005%

Frequency Stability

0.001%

Temperature Range

-30℃to +50℃

Microphone

Plug-in dynamic; with push-to-talk /UP/DN/ 

ASQ switch and coiled cord

Input Voltage

DC 13.8V normal, 15.9V max; 11.7V 

min Transmit: AM full mod 5A Receiver: 

Squelched 0.6A  SSB 30W PEP output 9A

Size

28 x 25 x 6 cm

Weight

2.8 kg

Antenna Connector

UHF, SO239

TRANSMITTER

Power Output

AM/CW: 1-12W (adjustable)
FM: 2-40W (adjustable)
USB/LSB: 0-30W (adjustable)

Modulation

High and low level class B

Amplitude Modulation: AM

Varied Capacitance Frequency Modulation: 

FM 

Inter-modulation 

Distortion

SSB:  3rd order, more than -25dB; 5th 

order, more than -35dB

SSB Carrier Suppression 55dB
Unwanted Sideband

50dB

Frequency Response

AM and FM: 450 to 2500 Hz

Output Impedance

50 ohms, unbalanced

Sensitivity

SSB: 0.25μV for 10dB(S+N)/N at greater 

than 1/2-watt of audio output.

AM: 1.0μV for 10 dB(S+N)/N at greater 

than 1/2watt of audio output.

FM: 1.0 μV for 20 dB (S+N)/N at greater 

than 1/2 watt of audio output.

Selectivity

AM/FM: 6dB@3KHz,50dB @9KHz 
SSB: 6 [email protected],60dB @3.3KHz

Image Rejection

More than 65dB

IF Frequency

AM/FM: 10.695 MHz 1st IF, 455 KHz 2nd IF  
SSB: 10.695 MHz

Adjacent-Channel 

60dB AM/FM & 70dB SSB

RF Gain Control

45dB adjustable for optimum signal 

reception

Automatic Gain 

Control(AGC)

Less than 10dB change in audio output for 

inputs from 10 to 100,000 microvolt.

Squelch

Adjustable; threshold less than 0.5 μV.

Automatic Squelch Control (only AM/FM) 

0.5 μV

ANL

Switchable

Noise Blanker

RF type, effective on AM/FM and SSB

Audio Output Power

4 watts into 8 ohms

Frequency Response

300 to 2800 Hz

Built-in Speaker

8 ohms, round.

External Speaker(Not 

Supplied)

8 ohms; disables internal speaker when 

connected.

Summary of Contents for DX-5000 PLUS


















Reviews: