Welcome to use this Bluetooth stereo receiver BTR017N. Please read this
user’s manual carefully before use.
Before use
1.
About BTR017N
BTR017N is a stereo Bluetooth receiver. A common audio device also can
receive Bluetooth audio by using it.
2.
System requirements
1)Audio device with 3.5mm audio input jack, such as speakers, radios etc .
2)Bluetooth transmitting device supporting A2DP profile, such as Bluetooth
mobile phones, Bluetooth transmitter etc.
3.
Overview of BTR017N
1
Micro USB charging jack
4
NFC induction zone
2
LED indicator
5
The cable slot
3
MFB button
6
3.5mm audio input jack
1
Getting started
1.
Charging the receiver
BTR017N comes with a built-in rechargeable battery, prior to using it, it is
recommended to charge the battery fully for the first time. When the
receiver emits a string of warning tones every 1 minute and the red LED
flashes. It means battery low. Please recharge the battery fully.
1)Plug the USB charging cable into the charging jack of PC or charger.
2)
Plug the end of USB charging cable into charging port of receiver.
RED light on
→
Charging
RED light off
→
Finished charging
3
)
It will take about 2 hours to finish charging.
Warning:
The battery is recyclable.
Batteries (battery pack or batteries installed) shall not be exposed to
excessive heat place, such as sunshine, fire or the like.
2 Reeling the cable
1) Please reel the audio line into the cable slot if you don’t use the product.
It is convenient to carry and store. Please operate it as shown below .
2
