When the volume of BTH008 is adjusted to max. or min, you will hear an indication
tone.
To remotely control the last song/next song/pause/play function, your audio source
needs to support AVRCP. Please refer to your cell phone’s or your Bluetooth
transmitter’s user manual for further information.
7. LED indicator
1) When charging
BTH008
LED indicator
The status of BTH008
Red LED is on
Charging
Red LED is off
Charging finished
2) When Pairing with a Bluetooth device
LED indicator
The status of BTH008
Red and blue LEDs flash alternately
Pairing mode
Blue LED flashes once quickly every 2 seconds
Standby
mode
(not
connected to a Bluetooth
device)
Blue LED flashes twice quickly every 4-5 seconds HFP or A2DP profile is
actived
Blue LED flashes three times quickly every 4~5
seconds
HFP and A2DP profile is
actived simultaneously
Blue LED is circularly gradual on and off
Conversation mode
Red LED flashes twice every 20seconds
Low power
8. Indication tone
Care and maintenance
Read the following recommendations before using BTH008. Following these you will
be able to enjoy our product for many years.
Keep it dry and don’t take it to damp places to avoid the product’s internal circuit
being affected.
Keep the product away from direct sunlight or hot places. High temperatures will
shorten the life of electronic devices, destroy the battery or distort certain plastic
parts.
Don’t expose the product to cold areas. It may damage the internal circuit board.
Don’t try to disassemble the product as it may get damaged if you are not
professional.
Don’t let it fall down onto the floor or other hard surfaces. The internal circuit might
get damaged.
Don’t use intensive chemical products or detergent to clean the product.
Indication tone
The status of BTH008
Two indication tones every 5 seconds
Conversation
mode
and
microphone muted
Three “DU” tones every 20 seconds
Low power
