Basic operation
1.
Switching on/off BTH008
Function
Operation
LED indicator
Indication tone
Switching
on
BTH008
Press and hold
MFB
button for
5 7 seconds
Blue LED is on
steadily
for
1
second
A long tone
Switching
off
BTH008
Press and hold
MFB
button for
seconds
Red LED is on
steadily
for
1
second
A long tone
Remark:
In order to save power, BTH008 will switch off automatically if no devices can be
connected after 5 minutes.
2.
Pairing BTH008 with a Bluetooth cell phone
1) How to enter pairing mode
Remark:
The pairing mode will last 2 minutes. BTH008 will switch to standby mode
automatically if no devices can be connected after 2 minutes.
2) Pairing
BTH008 with a Bluetooth cell phone
You have to pair BTH008 with a Bluetooth cell phone before first using it. Please
make sure your cell phone is Bluetooth-enabled and turn on Bluetooth. Specific pairing
steps may vary with different cell phones. Please refer to your cell phone’s user manual
for further information. The general pairing steps are as follows:
1)
Keep BTH008 and Bluetooth cell phone within 1 meter when pairing;
2)
Enter BTH008’s pairing mode (please refer to “How to enter pairing mode);
3)
Switch on the cell phone’s Bluetooth function and search for Bluetooth device. After
the search is completed, select “BTH008” from the Bluetooth device list;
4)
According to the indication, enter password or PIN No:”0000”, and press ” Yes” or
“confirm”.
5)
After successful pairing, select “BTH008” from the Bluetooth device list and press
“connect”.
6)
After successful connecting, the blue LED of BTH008 will flash twice or three times
every 5 seconds.
Remarks:
If the pairing is not successful, please switch off BTH008 and try re-pairing according
to the steps 1-6 mentioned above.
After pairing is successful, BTH008 and the cell phone will remember each other,
BTH008 will not need to re-pair next time. BTH008 can remember 8 paired devices.
When the number of paired devices exceeds 8, the first one will be replaced.
Function
Operation
LED indicator Indication
tone
Entering
pairing mode
Make sure BTH008 is off, and press
and hold
MFB
button for about 7 9
seconds and release it when the red
and blue LEDs flash alternately
Red and Blue
LEDs
flash
alternately
Two short tones