8
m
AINteNANce
m
aintEnancE
s
chEdulE
• Clean worm and gear of dirty/excess grease and reapply molybdenum disulfide grease every year
(occasional use) or every 6 months (heavy use)
• Use ISO VG 100 (SAE 30 wt.) non-detergent oil to lubricate the bushings every 6 months (occasional
use) or every 2 months (heavy use)
• Check oil level on hydraulic jack monthly. Lower the jack piston and remove the filler plug. Oil should
be just below the filler hole. Fill as needed with good quality hydraulic oil.
E
nd
-
of
-l
ifE
i
nstructions
The K-Line® Revolving Engine Stand is designed to provide a long life of service. If the need arises
to decommission a stand, contact K-Line® customer service for scrap/disposal instructions for your
location.
s
toRAGe
R
equIRemeNts
Store upright in a cool, dry location. If storing for more than 3 months, clean and wipe unpainted
surfaces with light oil to protect against corrosion. Remove gear cover and coat mating surfaces
of worm and gear with a generous amount of molybdenum disulfide grease. Take care not to
contaminate bushings with grease. Replace gear cover.
After long-term storage, re-oil all bushings with ISO VG 100 (SAE 30 wt.) non-detergent oil. Remove
gear cover and wipe off dirty or excess grease from worm and gear. Reapply grease as needed. Replace
gear cover.