4
p
Roduct
d
AtA
:
• Rated capacity: 2722 kg (6,000 lb)
• Full 360° rotation capability
• Maximum output torque rating: 1356 N-m (12,000 in.-lbs.)
• Stand weight including supplied adapter plates: approximately 400kg (882 lb)
• Lifting stoke at mounting hub surface – 305mm (12”)
• Angle of mounting hub surface – level to 35° inclined
P
roHibited
a
ction
WARNING
To avoid serious or fatal injury, only
use the K-Line® Engine Stand for its
intended purpose, which is holding,
rotating, and lifting engines within
the WLL and requirements detailed in this manual
and on equipment labels.
To avoid serious or fatal injury, do
not exceed the Working Load Limit
(WLL) of any K-Line® Engine Stand
component.
Do not modify the K-Line® Engine
Stand in any way by welding, heating,
drilling, machining, or grinding.
To avoid serious or fatal injury due
to load instability, do not use the
K-Line® Engine Stand on unstable
surfaces or aboard a vessel or vehicle
of any kind.
A
dditionAl
W
Arnings
:
1. Keep all body members clear of the engine and stand during use. Unavoidable pinch, crush, and
entanglement points exist in the assembly.
2. Do not wear loose clothing or jewelry as they can be caught in stand components.
3. Do not use the stand if there are bent, broken, cracked, or damaged components (including label).
4. Exercise extreme caution during mounting of engine, as the engine could shift unexpectedly on its
supports.
5. Exercise caution when walking around the engine stand. Potential trip hazards exist due to the frame
structure.
6. Check mounting of the engine before use. Only use adapter plates and mounting bolts specified for
use with the engine and stand, rated for the weight of the engine.