K-Line KL30230, Operating Instructions Manual, Page: 6 / 12

6
E
nvironmEntal
r
EquirEmEnts
• Temperature
-23°C to 93°C (-10°F to 200°F)
• Humidity
Use in any humidity condition is permissible
• Wind Effects
Wind gusts in the work area must be below 32 kph (20 mph) during use to avoid excessive
horizontal forces on the engine which can result in loss of stability
E
missions
• Noise
Under 56 dB
o
peRAtING
I
NstRuctIoNs
:
s
Etup
1. Ensure engine is within the capacity of the stand.
2. Select an appropriate engine adapter for the engine needing service. Ensure that the adapter will
keep the center of mass of the engine within 50.8mm (2’’) of the axis of the stand.
3. Torque socket head cap screws attaching the adapter to the stand to 135 N-m (100 ft-lb).
4. Use manufacturer’s recommended lifting points and a suitable hoist or lifting device to lift the
engine.
5. Use the selected adapter to mount the engine to the stand. Ensure adapter’s bolts are tightened to
the required torque values.
6. Slowly set weight of engine onto stand.
7. Remove lifting devices from engine.