![K.H. DEWERT 208 User Manual Download Page 8](http://html1.mh-extra.com/html/k-h-dewert/208/208_user-manual_648688008.webp)
Dewert User Manual Heavy-Weight Tables – Updated 11.2021/3 MDR Page 8 of 14
4.2 Technical data for electric motor
Manufacturer:
Hanning Elektro-Werke GmbH & Co, D-33813 Oerlinghausen
Type of motor:
SL 95 heavy-load version (height adjustment)
SL56 (head part adjustment model 7255E)
SL 80 (foot part adjustment model 7255E)
Type of actuator:
Brushless asynchronous industrial motor
Mode of operation:
Electromechanical linear motor with maintenance-free lifetime lubrication
Intermittent duty
– installed thermal switch
Electronic activation with internal supply for the control element
Duty cycle (DC): 25 s / 400 s
i.e. move the table for max. 25 seconds under nominal load, then observe a break of at
least 400 seconds.
Nominal voltage:
220
– 240 V, 1-50/60 Hz
Nominal consumption: Model 7209E: 900W, model 7255E: 1720W
Current consumption: Model 7209E: 4.0A, model 7255E: 7.5A
Protection class:
II (protective insulation), connecting cable without protective conductor
Protection rating:
IP X4
– resistant to water splashes,
Degree of protection:
B
The motors are maintenance free.
When operated with sinusoidal alternating voltage, the motors used do not cause field or line-borne interference
within the meaning of EN 50081, Part 1 and 2, nor can their function be impaired by electromagnetic influences
within the meaning of EN 50082, Part 1 and 2.
5. Cleaning instructions
Upholstery covering
There are two different collections of upholstery covering to choose from:
•
Skai Pandoria Plus (manufactured by Hornschuch/Continental in Germany)
•
Skai Toronto EN (manufactured by Hornschuch/Continental in Germany)
For cleaning and disinfection, a selection of agents from various manufacturers has been tested for
compatibility. Please refer to the separate enclosed sheet.
Not oil-resistant, not antistatic!
A different upholstery covering is necessary for these requirements.
The table is equipped as standard with the
Dewert hygiene standards
, which enable optimal cleaning and
disinfection:
•
All undersides of the upholstery parts are coated with an upholstery covering and can thus be cleaned
and disinfected
•
Vent holes underneath the upholstery:
For the homogeneous foam to recover quickly, a rapid exchange of air is necessary. To ensure this, there
are individual vent points on the underside of the upholstery, which are hygienically sealed with special air
compensation caps that assume a valve function.
•
Easy hygiene due to an open design
•
Optional: Upholstery covering Skai Toronto EN with staynu
Table frame
The plastic-coated table frame can be cleaned with mild household cleaners, if necessary. Do not use
aggressive, abrasive or corrosive agents. After cleaning, dry the frame with a soft dry cloth. Seal deep
scratches and worn areas with suitable repair agents to prevent moisture penetration.