User information
Angled mincer WW 130/160
WWD130
10.06.2022
Speicherdatum 10.06.2022 11:53:00
Seite 12
3.1.6 Machine safety switch
Coded machine safety switches within the machine monitor the
position of the discharge guard and protective grating.
Switches with a personnel protection function may only be replaced
by K+G WETTER customer service or an authorised contractor with
identical switches.
3.2
Risks, which cannot be excluded inspite of integrated safety features
◆
The cutter assembly is covered by the discharge guard in
accordance with regulations. With improper handling and a final
perforated disc with larger holes however, it is possible for fingers
to reach the knives. It is prohibited to reach under the discharge
guard.
◆
The dangerous areas in the funnel are covered with protective
grating according to regulations. The closed position of the
grating is monitored by coded machine safety switches for
protection of persons. The protective grating may not be modified
or removed. If the safety switch malfunctions, the machine must
be put out of operation until the malfunction is corrected. It is
prohibited to operate the meat mincer without a functioning
protective grid.
◆
The run-on time after the machine is switched off is ca.
2 seconds. It is prohibited to reach into the discharge until the
knives have come to a stop.
◆
Operation with improperly installed cutter assembly.
The knives can be destroyed and the machine damaged. The
possibilities for assembling the cutter assembly described in
chapter 4.3 should be observed. The locking ring must not be
screwed in too tightly.
◆
Loading with unauthorised material (e.g. frozen meat).
The working worm can become blocked and break. The meat
mincer can come to a stop and the motor can overheat.
◆
The loading material can represent a danger to the operator, the
surroundings and the machine. Only those materials listed in
chapter 2.10.1 may be used.
3.3
Safety tests for each working day
The machine may only be operated with perfectly functioning safety
devices (see Chap. 3.1) The following tests must be carried out at
the start of each working day:
- Open the discharge guard (Fig. 1, Pos. 8) while the machine is in
operation. The machine must switch off.
- Open the protective grating (Fig. 1, Pos. 1) while the machine is in
operation. The machine must switch off.
