30
values are sent for an operation in the TFT system. Their parameters are the same for each group.
Take a group as an example, describing their parameter.
Fig. 5.6 parameter window ―Customize‖
Parameter “Customize active”
This parameter defines whether customize values function is active. Options:
Active
Inactive
If selecting ―active‖, the following parameters will be visible.
Parameter “Interval period=entry*0.1s”
This parameter is used to set the interval period which the object values will be send out on the
bus via an operation in the TFT system for a group. Options: 10…50
Parameter “Group x, x=A…R”
This parameter defines whether the group x is active. Options:
Active
Inactive
If selecting ―active‖, the following parameters will be visible.
—
Parameter “Name of group x”
This parameter is used to set the name that is shown in the TFT operation system for group x, at
most 10 characters can be input here.
—
Parameter “Icon number of group x”
This parameter is used to set the icon number that is shown in the TFT operation system for
group x. Option: 0…63