Rumble-KU315
User Guide
8
Rear Panel
1x SpeakON connector is situated on the rear panel of the
subwoofer as is shown in the picture below.
1 x NL4 SpeakON connector
IP65 protective seal
Installation
The Rumble-KU315 is extensively used in outdoor application
and comes equipped with a high-quality rubber protection piece
from the K-IP65KITB. This protective rubber piece is essential as
it’s installed on the input connector to prevent water and salt
from seeping into the cable and, in conjunction with a provided
gasket, effectively seal the input port.
To install IP65 protection please follow the procedure shown
below:
1. Before proceeding, ensure that you have all the supplied
components of the SpeakOn NL4 connector and of IP65
protection (rubber cable cover and gasket).
1. SpeakON connector
components
One-channel wiring
1+ 1- signal
2+ 2- (not connected)
2. rubber cover
and gasket
2. Choose a cable with a sheath for greater insulation and
pass it through the rubber cover accessory and trough
the cable gland.
2+
1+
1-
2-
2+
1+
1-
2-
2+
1+
1-
2-
12 mm
[0.5 in]
1+
1+
1–
1–
2–
2+
1+
1–
2–
2+
24 mm
[1 in]
1+
1–
2+ 2–
Spk2+
Spk +
Spk2–
Spk1+
Spk1–
Spk –
Spk1+
Spk1–
Spk2+
Spk2–
Speaker 1
Speaker 2
SpeakON NL4
connector
SpeakON NL4
connector
SpeakON NL4
connector
SpeakON NL4
connector
1+
1–
2–
2+
2+ 2–
Spk+
Spk–
SpeakON NL4
connector
1+
1–
1+
1–
1+
1–
