background image

Rumble-KU315

User Guide

6

Thank you for choosing this K-array products!

To ensure proper operation, please carefully read the owner’s 
manuals and safety instruction before using the products.

After reading this manual, be sure to keep it for future reference.

Should  you  have  any  questions  about  your  new 

device please contact K-array customer service at 

[email protected] or contact the official K-array distributor 

in your country.

The Rumble-KU315 is the most powerful passive subwoofer in 

the Rumble series, with a nominal rated power of 2000 W at 4 Ω. 

Made from water-resistant polyurea-coated birch plywood, this 
ultra-thin subwoofer features a 1x 15” neodymium transducer 

in  a  shallow  and  relatively  slim  box  and  is  certified  for  marine 

applications.

Unlike  other  subwoofers,  the  KU315  doesn’t  have  reflex 

openings but instead features two more 15” passive radiators 
that ensure the transducer excursion is as linear as possible 
with minimum residual noise. This design, along with durable 

materials and an upgrade to the SpeakOn NL4 connector, makes 

the Rumble-KU315 resistant to tough weather conditions and 
suitable for outdoor installations.

Summary of Contents for Rumble-KU315















Reviews: