13
PRELIMINARY
K-CTRL
DMX
Value Range Function
CH2
000-255
Level
CH3
050-255
Chase speed
CH4
000-049
Tact off
050-255
Tact (050=slow / 255=max. speed 23 Hz)
DMX channel Value Range Function
CH1
000-255
Output mix choice from presets (see “C” mode)
CH2
000-255
Master level
CH3
000-049
Static mix mode active
CH4
000-049
Tact off
050-255
Tact (050=slow / 255=max. speed 23 Hz)
If DMX value of channel 3 is equal or upper than 50
the unit works in pattern mode:
Output mix presets can be activated by means of CH1 whilst the chosen mix can be
adjusted with CH2. If the value of CH4 is above 50 the unit is set to tact mode. The tact
speed for any fixed output mix chosen on the first channel can be adjusted from zero
(value <50) to 23 cycles per second (value 255).
CH1
Pattern
CH1
Pattern
000-015
Soft fade Out1-Out2
136-150
Hard switch Out2-Out3
016-030
Soft fade Out2-Out3
151-165
Hard switch Out1-Out3
031-045
Soft fade Out1-Out3
166-180
Hard switch Out1-MixA
046-060
Soft fade Out1-MixA
181-195
Hard switch MixB-MixC
061-075
Soft fade MixB-MixC
196-210
Hard switch MixD-MixE
076-090
Soft fade MixD-MixE
211-225
Hard switch MixF-MixG
091-105
Soft fade MixF-MixG
226-240
Hard switch Out1-Out2-Out3
106-120
Soft fade Out1-Out2-Out3
241-255
Hard switch Out1-MixA-Out2
121-135
Hard switch Out1-Out2
-MixB-Out3-MixC
address comes effective approximately 3 seconds later and will show up on the display
(2) in alternation to the “P”.
The unit receives DMX values on a packet of four channels and mirrors the received data
on the DMX output (13). If a DMX signal is present the DMX LED (3) will turn on. The four
channels control the unit as follows:
If DMX-value of channel 3 is lower than 50 the unit works with static colours:
