BIOS Setup
41
Appendix B BIOS Setup
B.
1
Entering the BIOS
1.
Power on or reboot the PXIe-
63988
controller.
2.
Press the <Delete> or <Esc> key when the controller
beeps. This should be concurrent with the main startup
screen. The BIOS setup program loads after a short
delay.
3.
The Main menu is displayed when you first enter the
BIOS setup program.
The main BIOS setup menu is the first screen that you can navi-
gate. Each main BIOS setup menu option is described in this
chapter.
The Main BIOS setup menu screen has two main frames. The left
frame displays all the options that can be configured. “Grayed”
options cannot be configured, “Blue” options can.
The right frame displays the key legend. Above the key legend is
an area reserved for a text message. When an option is selected
in the left frame, it is highlighted in white. Often a text message will
accompany it.
PXIe-63988
Summary of Contents for PXIe-63988
