JYTEK NuDAQ PCI-69222 User Manual Download Page 18

Page: 18 / 80

Introduction

1.4 Unpacking Checklist

Before unpacking, check the shipping carton for any damage. If

the shipping carton and/or contents are damaged, inform your

dealer immediately. Retain the shipping carton and packing mate

rials for inspection. Obtain authorization from your dealer before

returning any product to JYTEK.
Check if the following items are included in the package.



PCI-69222 or PCI-69223 multi-function DAQ card

If any of the items is damaged or missing, contact your dealer

immediately.

CAUTION

The card must be protected from static discharge and

physical shock. Never remove any of the socketed parts

except at a static-free workstation. Use the anti-static bag

shipped with the product to handle the card. Wear a

grounded wrist strap when servicing.Software Support

1.5 Software Support

JYTEK provides comprehensive software drivers and packages to

suit various user approach to building a system. Aside from pro

gramming libraries, such as DLLs, for most Windows-based sys

tems, JYTEK also provides drivers for other application

environment. JYTEK also provides ActiveX component ware for

measurement and SCADA/HMI, and breakthrough proprietary

software applications.
All software options are included on the website: http://

www.jytek.com.

Summary of Contents for NuDAQ PCI-69222

















































































Search results

Summary of Contents for NuDAQ PCI-69222

Reviews:

Related manuals for NuDAQ PCI-69222

Brands by name

Popular brands

JYTEK NuDAQ PCI-69222, User Manual

Search results

Summary of Contents for NuDAQ PCI-69222

Reviews:

Related manuals for NuDAQ PCI-69222

Brands by name

Popular brands