JYDELAND BOBMAN FL, Instructions Manual

Page: 9 / 24

Adjustment of scraper height using 19
mm spanner
Rubber on scraper can be replaced.
Using the Bobman spreader
1
Fill hopper with sawdust or chopped straw, 3-8 cm pieces, by lowering and
driving into sawdust/straw pile.
2
Lower scraper onto ribbed floor.
3 Start hydraulics on right side of steering wheel. (on/off)
4
Start brush using left pedal. The brush will automatically deploy. Release pedal
to stop brush and return it to transport position.
5
Open baffle in hopper for quantity to be spread..
6 Shake hopper by hand if necessary to loosen material.
Working in barn - important!
• Floor must be scraped clean twice (or more) times daily
• Bed must be swept clean and dry
• Thin layer of sawdust or chopped straw spread over bed
9