background image

Cleaning

Always keep engine clean - use com-

pressed air if necessary. Avoid blow-

ing directly into air filter. Replace air 

filter often to avoid reducing engine 

power due to dust in air. The machine 

can also be cleaned by high pressure 

washer, but never aim jet directly at 

air filter, breather pipe for hydraulics 

under seat, diesel filler cap, wiring 

and electronics.

Tightening up and damage 

Tightening up screws and bolts must 

be done regularly. 
Always repair any damage immedi-
ately after discovery. 

Weekly check 

Check there is sufficient oil in engine 

(W15-40). 

Monthly check

Check level of hydraulic oil in sight 

glass on right side of machine (HV32 

HV46). 

Lubrication 

Lubricate steering chain with oil 

(spray-on chain oil is recommended). 

Lubricate ball joints with no grease 

nipple and universal joint on steering 

column with oil. kugleled som ikke har 

nipler smøres også med olie.

Hydraulic oil

Hydraulic oil level must be in centre 

of sight glass. 

Replace hydraulic oil after analysis or 

2000 hours. 

Fill hydraulic oil (HV32 / HV46) at 

filter on right side of hydraulic oil 

tank. 

Hydraulic oil filter 

Change hydraulic oil filter first time 

after 50 hours and thereafter every 

500 hours or once annually. NB: if oil 

colour is milky white, there is water 

in the system. Change oil

Steering

Back wheel is turned by chains from 

steering wheel passing under seat. 

Remove seat and top panel to adjust. 

Battery 

12 V sealed battery. 

Keep terminals clean. 

Maintenance 

10

Summary of Contents for BOBMAN FL

























Reviews: