jWIN JV-DTV23, Owner'S Manual, Page: 18 / 188

Sound adjustment
18
Language selection for dual language broadcast
If a programme received in two languages (dual language),
you can switch to
DUAL I , DUAL II or DUAL I+II by press-
ing the I/II button repeatedly.
DUAL I sends the primary broadcast language to the loud-
speakers.
DUAL II sends the secondary broadcast language to the
loudspeakers.
DUAL I+II sends a separate language to each loudspeaker.
If your set is equipped with the receiver for NICAM recep-
tion, the high quality NICAM (Near Instantaneous
Companding Audio Multiplex) digital sound can be
received.
Sound output can be selected according to the type of
received broadcast as follows by pressing the
I/II button
repeatedly.
When NICAM mono is received, you can select NICAM
MONO or FM MONO.
When NICAM stereo is received, you can select NICAM
STEREO or FM MONO. If the stereo signal is weak, switch
to FM mono.
When NICAM dual is received, you can select NICAM
DUAL I , NICAM DUAL II or NICAM DUAL I+II or
MONO . When FM mono is selected the display MONO
appears on the screen.
Mono sound selection
In stereo reception if the
stereo signal is weak, you
can switch to mono by
pressing the
I/II button twice.
In mono reception the depth
of sound is improved. To
switch back to stereo, press
the
I/II button twice again.
In AV mode, you can select
output sound for the left
and right loudspeakers.
Repeatedly press the
I/II
button to select the sound
output.
L+R :Audio signal from
audio L input is sent to left
loud-speaker and audio
signal from audio R input is
sent to right loudspeaker.
L+L : Audio signal from
audio L input is sent to left
and right loudspeakers.
R+R : Audio signal from
audio R input is sent to left
and right loud-speakers.
4
4
Stereo/Dual/NICAM reception