jWIN JD-VR70, Operation Manual, Page: 53 / 72

Alarm Information
Set up the alarm mode: if you clicked “Warning”, window about “Alarm Information” is
popped up.
On this window, if you check the Check-box “use Alarm window”, ”Alarm Information “is
popped up when Client got Alarm event from
jWINSheriff
. And this window display
information as like “Site Name”, “camera channel”, “Alarm Type”, “Time”
On Multi size, when Client got Alarm event from recorder, Warning button is twinkle.
If you clicked Warning Button, Window that has Alarm Event information, pop up
On Single Site, according to Warning signal, Warning button is turned on.
After Warning Occurred at Recorder and Remote viewer get warning signal, you could turn
off the warning at Recorder from Client, if you have ID that has authority of setup.
53