jWIN JD-VD504, Operating Instructions Manual

Page: 21 / 37

PLAY
Press this button to play the disc.
4. Function Buttons
4.1 Function Buttons on the DVD Player
(the same as the function of the corresponding buttons on the remote control)
POWER
Pr
ess the button to switch the unit ON/OFF.
Press this button and the disc tray will open. After the disc is put into the tray,
press this button again to close the tray.
OPEN/CLOSE
Press this button once and the player will be in memory stop. Press this button
twice and the player will be in complete stop.
STOP
4.2 Function Buttons on the Remote Controller
PREVIOUS/NEXT
Press the button to play the previous or next track or the previous or next film
segment.
MUTE
Press this button once to turn off sound and press it again to turn on sound.
OSD
Press this button to display the information of playing disc.
BOOKMARK
Press this button to enter into the menu for system setting and press this button
again to exit the menu.
SETUP
Press this button to reset the unit to the original factory set. (The player must be
in complete stop state, opening tray state or no disc state.)
RECALL
ARROW KEYS (Up, Down, Left and Right)
Press these keys to move the highlighted bar or cursor to the appointed item.
ENGLISH-8
Press this button to mark the memory playing point according to your requires.
(This function requires the support from the disc.)
PLAY ENTER CLEAR
ARROW
or button: enter mark point. button: clear mark point.
keys: move cursor.