background image

HOME DVD PLAYER 

                                                                 V10M10_IM_EN_09142009                                             

www.jWIN.com  

22 

ADVANCED FEATURES 

 

USB interface 

This unit has a USB port, When a disc is in the player and stopped or there is no disc in the 
player, you can insert a USB device or an MP3 Player with USB Interface and play MP3 music 
or watch JPEG files by pressing [

USB

] in the remote control. All functions are the same as 

playing a disc. Not all USB Devices can be supported by this system. 
 

NOTE:

 When using the USB function. Please do not insert in the wrong direction, or it will be 

corrupted.

 

 

Care and Maintenance 

Handling a Disc 

 

Treat the disc carefully. Handle the disc only by its edges. Never allow your fingers to 
contact with the shiny, unprinted side of the disc. 

 

Do not attach adhesive tape, stickers etc., to the disc label. 

 

Clean the disc periodically with soft, lint-free, dry cloth. Never use detergents or adhesive 
cleaners to clean the disc. If necessary, use a CD or DVD cleaning kit. 

 

If disc skips or gets stuck on a section of the disc, it is probably dirty or damaged 
(scratched). 

 

When cleaning the disc, wipe in straight lines from the centre of the disc to the edge of the 
disc. Never wipe in circular motions. 

 

To remove a disc from its storage case, press down on the centre of the case and lift the 
disc outs, holding it carefully by the edges. 

 

Fingerprints and dust should be carefully wiped off the disc's recorded surface with a soft 
cloth. Unlike conventional records. compact disc have no groove to collect dust and 
microscopic debris, so gently wiping with a soft cloth should remove most particles. 

 

 
Cleaning the Unit 

 

To prevent fire or shock hazard, disconnect your unit from the AC power source when 
cleaning. 

 

The finish on the unit may be cleaned with a dust cloth and cared for as other furniture, 
Use caution when cleaning and wiping the plastic parts. 

 

If the cabinets become dusty wipe them with a soft dry dust cloth. Do not use any wax or 
polish sprays on the cabinets. 

 

If the front panel becomes dirty or smudged with fingerprints it may be cleaned with a soft 
cloth slightly dampened with a mild soap and water solution. Never use abrasive cloths or 
polishes as these will damage the finish of your unit. 

 
       

Caution

: never allow any water or other liquids to get inside the unit while cleaning.  

 

HOME DVD PLAYER 

                                                                 V10M10_IM_EN_09142009             

www.jWIN.com  

23

TROUBLESHOOTING GUIDE 

 

No picture or no sound 

 

Ensure whether the [

POWER

] button on the front panel is on. 

 

Ensure whether the power cord is connected properly. 

 

Ensure the power outlet is working. 

 

Picture but no sound 

 

Ensure the audio jacks are securely connected. 

 

Ensure the volume is turned up to the proper level. 

 

Ensure you have set the AUDIO settings correctly. 

 

Ensure you have connected the audio cable properly. 

 

Ensure the audio is not set to mute. 

 

Sound but no picture 

 

Ensure the video jacks are securely connected. 

 

Ensure you have connected the video cable properly. 

 

Ensure you have set the VIDEO settings correctly. 

 

Poor picture or poor sound 

 

Ensure you have set the AUDIO and VIDEO settings correctly. 

 

Ensure the disc is not scratched or stained. 

 

The “Bad Disc” indication is displayed. 

 

Ensure the disc is not warped, damaged or deformed. 

 

Ensure the disc is not badly stained or damaged. 

 

Ensure the disc format is compatible with the player. 

 

The remote control isn’t working.   

 

Make sure the [

POWER

] button on the main unit is set on. 

 

Point the remote control directly at the remote control sensor on the main unit. 

 

Remove any obstacles between the remote control and the remote control sensor. 

 

Change the remote control batteries. 

 

The “No Disc” indication is displayed. 

 

Ensure you have loaded a disc. 

 

Ensure the disc is not upside down. 

 

Ensure the disc isn’t distorted, stained or scratched. 

 

The main unit is not working. 

 

Power off the main unit and turn it on again. 

 
 
 
 

Summary of Contents for JD-VD143

















Reviews: