22
13) On the control panel, set the Horizontal and Vertical motor power controls to half power (5).
14) Set the Vertical Motor Trim control to midway (0).
KEEP HANDS/FINGERS AWAY FROM MOTORS
15) Turn on the Master Motor Switch (allows power to the motors).
CAREFUL WITH THE NEXT STEP
(motor seals can be damaged if the motors are left on for more than 5-10 seconds out of water)
16) Move the horizontal and vertical joysticks (for a few seconds) to insure the motors are running.
17) Turn off the Master Motor Switch.
TIME TO GET THE ROV WET
First test run (out of water): continued
Horizontal Motors
Joystick
Vertical Motors
Joystick
Camera Pan Left/Right
Camera Tilt Up
Camera Tilt Down
Lights Brighter
Lights Dimmer
Summary of Contents for SeaOtter-2
Page 11: ...11 Left Blank...
