19
Stopping
CONTINUOUS
mode
Press HOME. This takes you back to
the HOME screen. The purification
cycle will stop. The Shield will then
await further instructions.
Click on CONTINUOUS again. The
purification cycle will stop. The Shield
will then await further instructions.
USING BOOST MODE
BOOST mode is a shock purification mode.
Its purpose is to treat potent nuisance sources
in a short time (one-off unpleasant odours,
pollution, contamination and allergens) and
the mode shows on the screen as a quick
glow/fade.
JVD
®
’s patented Shield technology adapts
to the size of your room.
BOOST PURIFICATION DURATION
BOOST
10 mins
15 mins
20 mins
At the end of the BOOST cycle, the appliance will automatically switch back to the previous mode.
Activating
the mode
Press BOOST to start a shock
purification cycle. The Shield will start
performing the purification cycle.
Changing the area
being purified
You cannot change a purification area
during BOOST mode. If you do wish
to change the purification area, press
HOME to return to the HOME screen.
Select the new purification area, then
restart the BOOST mode.
Switching to
CONTINUOUS
mode
Press CONTINUOUS.
Refer to the CONTINUOUS section
of these instructions for information
about this mode.
Stopping BOOST
mode
Press HOME. This takes you back to
the HOME screen. The purification
cycle will stop. The Shield will then
await further instructions.
Press BOOST again. The purification
cycle will stop. The Shield will then
await further instructions.
We recommend activating BOOST mode no more than three times an hour. More frequent use will
reduce your appliance’s lifespan.