JVC XV-F80BK - Progressive-Scan DVD Player Service Manual Download Page 24 | Manualshive

Page: 24 / 100

background image

XV-F80BK/XV-F85GD

1-24

Adjustment method

(1) Test mode setting method

(2) Initialization method

(3) Method of displaying version of microcomputer

Please initialize according to the following procedures when microprocessor or pick-up is
exchanged and when the up-grade is done.

1)Take out the disc and close the tray.
2)Unplug the power plug.
3)Insert power plug into outlet while pressing both "PLAY" button and "STOP" button of the main body.
4)The player displays "TEST " on the FL display. keeps pushing the button until this is displayed.
" " means the player version.
5)When the power supply is turned off, test mode is released.

1)Makes to test mode.
2)After "FORWARD SKIP" button ( ) of the main body is pushed, "PAUSE" button is pushed.
3)A green progressive indicator lights when about ten seconds pass. Then, it is initialization completion.
(When scan mode is set to the progressive scanning, the indicator is green from red. )

1)Makes to test mode and initializes
2)When "CHOICE" button of remote control is pushed once, the figure is displayed on the FL display as follows.

3 6 _ 2 3 _ 3 4 _ F 9

FL Display

FL Display microcomputer (IC801)

Front end microcomputer (IC401)

Microcode of decoder

Decoder part (IC509)

POWER

Button

STOP Button

(for test mode)

FORWARD SKIP Button

(for initialize)

PLAY Button

(for test mode or display of jitter value)

PAUSE Button
(automatic adjustment
or initialize)

FL Display

PROGRESSIVE

Indicator

(for initialize)

The mode changes as follows whenever the "CHOICE" button of remote control is pushed in test mode.

CHOICE
Button (switch of mode)

TITLE Button

(laser ON)

BACK SKIP Button

(display of current value)

CURSOR UP Button
(firmware upgrade)

Becomes test mode

Version of microcomputer

Check mode

Confirmation of FL display

Not use mode

TEST_ _ -----------------------

_ _ _ ------------

CHECK ---------------------------------

FL display becomes all lighting ---

EXPERT ---------------------------------

«
...
22
23
24
25
26
...
»

Summary of Contents for XV-F80BK - Progressive-Scan DVD Player





































































































Reviews:

No comments

Related manuals for XV-F80BK - Progressive-Scan DVD Player

DVDLS91 - PORTABLE DVD PLAYER

Brand: Panasonic Pages: 32

Brand: Panasonic Pages: 37

Brand: Onkyo Pages: 32

Brand: Radio Shack Pages: 40

Brand: Goodmans Pages: 12

AZ7275 - Cd Personal

Brand: Magnavox Pages: 18

Brand: LEXIBOOK Pages: 66

Cassette Deck 6130

Brand: NAD Pages: 3

Brand: NAD Pages: 160

Brand: Numark Pages: 3

Brand: Sencor Pages: 29

Muvo Muvo Slim 512MB

Brand: Creative Pages: 75

Brand: X-Micro Pages: 28

Brand: Roku Pages: 20

Brand: Curtis Pages: 22

Brand: LEXIBOOK Pages: 112

Brand: Sling Media Pages: 2

Brand: Cowon Pages: 48

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands