JVC XV-F80BK - Progressive-Scan DVD Player, Service Manual

Page: 9 / 100

XV-F80BK/XV-F85GD
1-9
Prior to performing the following procedure, remove
the top cover, the front panel assembly and the main
tray assembly.
Disconnect the wire from connector CN808, CN809
and the card wire from CN210 on the servo control
board respectively.
Remove the seven screws E attaching the loading
base assembly.
1.
2.
Removing the loading base assembly
(See Fig.11)
Pull out the relay board 2 on the upper side of the
body.
Disconnect the wire from connector CN807, CN810
and CN910 on the servo control board respectively.
Remove the screw G attaching the lug wire.
Remove the three screws F attaching the servo
control board.
1.
2.
3.
4.
Servo control board
Prior to performing the following procedure, remove
the top cover, the front panel assembly, the main
tray assembly and the loading base assembly.
Removing each board (See Fig.12 to 14)
Pull out the relay board 2 on the upper side of the
body.
Remove the four screws H attaching the A/V output
board.
Remove the eight screws I on the back of the body.
1.
2.
3.
A/V output board
Disconnect the wire from connector CN952 and
CN953 on the power board.
Remove the four screws J on the upper side of the
body.
Remove the screw K on the back of the body.
1.
2.
3.
Power board
Disconnect the wire from connector CN842 on the
relay board 1.
Remove the two screws G attaching the relay board.
1.
2.
Relay board 1
Lug wire
Loading base assembly
E
E
E
E
Servo control board
CN210
CN808
CN809
E
Fig.11
Fig.12
Fig.13
Fig.14
F
F
F
G
Relay board 1
Rear panel
Relay board 2
A/V output board
CN810
CN807
CN901
CN842
Power
board
Power board
J
H
H
Rear panel
A/V output board
J
Relay board 2
Servo control
board
Servo control
board
Relay board 1
CN953
CN952
Rear panel
I
I K