XV-C3SL
7
SECTION 2
Disassembly method
2.1 Main body
There is a part different from the photograph according to the
model and the destination though explains this disassembly
method by using XV-C3SL for Europe.
2.1.1
Removing the top cover
(see Fig.1)
(1) Remove the two screws
A
attaching the top cover on both
sides of the body.
(2) Remove the three screws
B
attaching the top cover on the
back of the body.
(3) The slide is done backward and a top cover is removed.
Fig.1
2.1.2
Removing the front panel assembly and bracket
(see Fig.2,3)
• Prior to performing the following procedure, remove the top cover.
(1) Disconnect the flat wire from connector CN704,JT702,
JT703 on the main board.
(2) Four places in hook
a
and
b
are removed, the front panel as-
sembly is slide to forward and it is removed.
(3) Remove the two screws
C
attaching the bracket.
Fig.2
Fig.3
Summary of Contents for XV-C3SL
