XM-R700SL
1-8
Prior to performing the following procedures, remove
the MD door assembly and the bottom cover.
Disconnect the flexible wire from connector CN--- on
the main board (See Fig.7).
Remove the screw H attaching the jog assembly on
the right side of the cabinet assembly.
Slide and release the three joints f attaching the jog
assembly, and pull out the jog assembly fromthe part
g on the cabinet assembly.
1.
2.
3.
Removing the jog assembly
(See Fig.7 and 11)
Prior to performing the following procedures, remove
the MD door assembly and the bottom cover.
Remove the two screws I and the one screw J
attaching the door plate on the inside of the MDdoor
assembly. Peel off the adhesive tape attaching the
flexible wire.
Pull out the door plate assembly in the direction of
the arrow from the part h on the MD doorassembly.
Remove the LCD assembly and the 5 key sheet from
the door plate assembly (They are attachedwith the
adhesive tapes).
1.
2.
3.
Removing the LCD assembly and the 5
key sheet (See Fig.12 to 15)
H
Part g
Jog assembly
Joints f
Joints f
Fig.12
Fig.13
Fig.15
Fig.14
Part h
Door plate assembly
I
I
J
MD door assembly
Adhesive tape
5 key sheet
LCD assembly
Door plate assembly
I
J
Door plate assembly
Part h
I
Summary of Contents for XM-R700SL
Page 40: ...2 2 XM R700SL M E M O ...
Page 46: ...XM R700SL 3 2 M E M O ...
