27
English
•
To enter a space, press
¡
to move the cursor to the right (or turn the jog dial to
select a space, then press SET).
•
To move the cursor while entering a title, press
1
or
¡
.
•
If you have entered an incorrect character, press
7
STOP/CANCEL to cancel the
last entry.
To make a correction or change the title:
1
Press
1
or
¡
to move the cursor on an incorrect character, and press
7
STOP/CANCEL.
2
Turn the jog dial to select the correct character, then press SET.
To erase all the input characters:
Press
7
STOP/CANCEL repeatedly until all the input characters are erased.
5 Press ENTER.
The display shows “EDITING” and the TOC indicator lights up.
Next, the display shows the disc title name and then shows the track number and the
total playing time.
•
If the disc title is longer than 11 characters, it scrolls on the display.
Note: When using the TEXT COMPU LINK remote control system (see page 31),
titles will not be scrolled.
•
After editing the track title, the name of the track is not displayed.
6 Press
0
to eject the MD.
The data in memory is written in the MD before it is ejected.
The display shows “UTOCwriting” during MD writing operation.
•
Be careful not to apply impact to the MD recorder during writing temporarily stored
data into the MD. Otherwise the title may not be able to appear during a later
playback.
•
The data in memory is written in the MD also when the power is turned off while
“EDITING” is being displayed.
To cancel editing:
Press TITLE before pressing ENTER in step 5.
(Disc Title)
(Space)
Available symbols
EN26-29.XM-448BK[E]/f
99.3.4, 9:48 AM
27
