JVC XL-R5010BK Instructions Manual Download | Manualshive

Page: 49 / 54

background image

43

E

nglish

Engli

s

h

COMPU LINK Function

What is COMPU LINK?

The COMPU LINK Remote Control System (or, simply, “COMPU LINK”) serves to enable the kind of simple operations provided by an inte-
grated system to be performed even though this unit is a separate component.
These simple operations can be performed by connecting the COMPU LINK-4 SYNCHRO, COMPU LINK-3 SYNCHRO or COMPU LINK-
1 SYNCHRO connector on each of the components involved.

The COMPU LINK functions provided with JVC products come in
the form of COMPU LINK-4, COMPU LINK-3 or COMPU
LINK-1. They are compatible, and the difference between them is
that COMPU LINK-3 has the functions of COMPU LINK-1 with
some additional functions as well.

COMPU LINK functions compatible with this unit

Automatic Power On/Standby

Selecting a source on the amplifier/receiver automatically turns on
the relevant component. Similarly, turning a linked component on
automatically turns the amplifier/receiver on.

Automatic Source Selection

Selecting a source on the connected amplifier/receiver automati-
cally starts its operation. Similarly, starting operation of a linked
component will automatically selects the relevant source on the
amplifier/receiver.
When this unit is selected as the source, a selected tray (3CD or
CDR) will start to play

Notes

• The type of interactive peration described above requires that

your JVC amplifier/receiver feature COMPU LINK-4, or it will
not be compatible with this unit (the CDR will not be recog-
nized by previous COMPU LINK versions). when your JVC
amplifier/receiver does not feature COMPU LINK-4, set the
COMPU LINK MODE switch on the rear panel of this unit to
“TD”, and make connections to the tape deck connectors on the
amplifier/receiver. doing this enables you to use this unit with
the COMPU LINK functions, however, COMPU LINK control
of a cassette deck will no longer be possible.

• Synchro recording using the COMPU LINK is not compatible

with this unit.

Connections

Accessory connecting cables

Amplifier

CD player

CD/CDR MULTIPLE
COMPACT DISC
RECORDER

XL-R5010BK.book Page 43 Monday, June 4, 2001 11:40 AM

«
...
47
48
49
50
51
...
»

Summary of Contents for XL-R5010BK























































Reviews:

No comments

Related manuals for XL-R5010BK

Brand: Campbell Pages: 18

Brand: Vector Pages: 4

Brand: MAHLE Pages: 21

Brand: Panasonic Pages: 174

Brand: XAG Pages: 24

Brand: 3M Pages: 48

Brand: 3M Pages: 19

Speedglas G5-01

Brand: 3M Pages: 62

Quickfit Nexus Exit

Brand: Thomas & Betts Pages: 2

Brand: made for movement Pages: 51

Brand: Garmin Pages: 20

Brand: JB-Lighting Pages: 32

Brand: W&H Pages: 72

Brand: Raytheon Pages: 68

Brand: KegLand Pages: 23

Brand: Madrigal Pages: 5

Brand: MacDon Pages: 504

Brand: Cannon Pages: 70

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands