JVC XL-R5010BK Instructions Manual Download Page 1 | Manualshive

Page: 1 / 54

background image

ERRATA

INCORRECT

CORRECT

•

If the power cord is unplugged from the wall socket for more
than an hour, the internal clock, program, etc. of the main unit
may require resetting. When this occurs, please set the clock
(and timer functions) again.

• If the power cord is unplugged from the wall socket for more

than a few seconds, the internal clock, program, etc. of the main
unit may require resetting. When this occurs, please set the
clock (and timer functions) again.

1

Load CDs into the trays of the 3-CD changer.

•

Only tracks on the CDs loaded in the 3-CD changer can be reg-
istered into the program (i.e., tracks on a CD loaded in the CDR
cannot be selected for playback).

•

“CD READ DISC” will be shown in the information display as
the unit reads the information from each disc.

1

Load CDs into the trays of the 3-CD changer.

• Only tracks on the CDs loaded in the 3-CD changer can be reg-

istered into the program (i.e., tracks on a CD loaded in the CDR
cannot be selected for playback).

• “CD READ DISC” will be shown in the information display as

the unit reads the information from each disc.

Note

• To close a tray, press the

0

button for the tray number that is

open. If you press the

0

button for a tray number other than that

for the tray that is open, the program may not be played correctly.

1

Load CDs into the trays of the 3-CD changer.

•

Only tracks on the CDs loaded in the 3-CD changer can be reg-
istered into the program (i.e., tracks on a CD loaded in the CDR
cannot be selected for playback).

•

“CD READ DISC” will be shown in the information display as
the unit reads the information from each disc.

1

Load CDs into the trays of the 3-CD changer.

• Only tracks on the CDs loaded in the 3-CD changer can be reg-

istered into the program (i.e., tracks on a CD loaded in the CDR
cannot be selected for playback).

• “CD READ DISC” will be shown in the information display as

the unit reads the information from each disc.

Note

• To close a tray, press the

0

button for the tray number that is

open. If you press the

0

button for a tray number other than that

for the tray that is open, the program may not be played correctly.

1

Load CDs in the 3-CD changer

1

Load CDs in the 3-CD changer

Note

• To close a tray, press the

0

button for the tray number that is

open. If you press the

0

button for a tray number other than that

for the tray that is open, the program may not be played correctly.

Turning the Power On and
Standby Mode

Programming Playback Using
Main Unit Controls

Programming Playback Using
the Remote Control

Program Edit Recording

Page 10

Page 18

Page 27

There were some errors in the instruction manual. We apologize for this and correct them as follows.

Page 17

Errata sheetA4.fm Page 1 Wednesday, May 9, 2001 9:47 PM

1
2
3
...
»

Summary of Contents for XL-R5010BK























































Reviews:

No comments

Related manuals for XL-R5010BK

Brand: Modulate Pages: 2

Brand: ZIGBEE Pages: 4

Brand: CAIRE Pages: 38

Brand: Caframo Pages: 72

Lab companion SI-300

Brand: Jeio tech Pages: 69

IP Video Test Option HST-3000

Brand: JDS Uniphase Pages: 4

Brand: Jct Pages: 16

Brand: MAGIC FX Pages: 25

Brand: Haas Pages: 12

Brand: SaMASZ Pages: 25

Brand: Yamaha Pages: 5

Brand: MÄDLER Pages: 4

Brand: Osprey Pages: 12

DIAGNOdent pen 2190

Brand: KaVo Pages: 2

Brand: P.Lindberg Pages: 10

Brand: Klus Pages: 8

Brand: Cameo Pages: 136

TO44/11.0-110-V-B

Brand: Vision & Control Pages: 60

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands