background image

-- 37 --

JVC VR-609

● JOG & SHUTTLE can search by frame in play mode by  

using JOG when it is paused ( ll ) and possible to quick 
search by an angle of the shuttle.

● At the menu setting, it is possible to move the position or 

change the value by using JOG .

Slow playback can be performed by using JOG during 

playback/Reverse playback. It takes a time for a while, 
from a SLOW onscreen display "| | | | ► " appear and 
then a SLOW PLAYBACK image starts. When you press
twice the PLAY/Reverse Playback button under shifting, 
the image changes immediately.

● When the DVR is in PLAY MODE, the buttons have the 

functions indicated above button mark. (REC, stop ( ■ ) 
/ pause( ll ) / reverse play (◄ )/ pause ( ll )/ play (►))

● When the DVR is in menu mode, the buttons have the 

functions indicated below. (EXIT, ENTER) 

4.1.5  Menu Setup

● You can easily change the Camera Setup, Recording Setup, 

and Audio Setup by the graphical user interface screen.

If you press the menu button, you can see the next menu screen. It
can be moved up and down by using Jog. The Menu is selected by
clicking the ENTER button.

Setup value (symbols, Alphabet Upper case (Capital) letters, lower
case letters, numbers and position) of the menu can be changed by
using X & Y axis /EXIT/ENTER buttons, and INPUT button.

In the play mode if you press the Enter button the DVR will be paused, then you 
can search field by field using the jog/shuttle control. You can search quickly 
using the Shuttle and slowly by using the Jog.

!

JOG

SHUTTLE

4.1.6 FREEZE

● By pressing the freeze button then pressing the channel buttons(1~9), 

the selected screen will display a still image.

Summary of Contents for VR-609







































































































Reviews: