-- 26 --
JVC VR-609
3.3 Pan/Tilt Camera Connection and Control
It is possible to control the Pan/Tilt camera without special devices.
The Pan/Tilt camera supports RS-485 and is given an ID for parallel connection.
Easy to install from the menu screen and possible to control by using the Jog Shuttle
.
3.3.1 The example of connection with TK-C676 or TK-C655
Linked with a power connection, control terminal connection, and video signal output
connection. The following figure is the example of connection with 9 sets of TK-C676 or
TK-C655.
●
Camera power connection.
●
Control terminal connection (RS-485) : Please use a twisted-pair cable. Connect a
+terminal (TX+) / -terminal (TX-) to the RX+ / RX-terminal of a Pan/Tilt camera. The
camera connected at the end should set-up a terminus (110
Ω
).
●
Video signal connection (Composite)
: Checks video mode (NTSC/PAL) and inputs video signals at each input terminal.
Coaxial cable
Control signal cable
AC 24 V
power supply
TK-C676 or
TK-C655
Digital Video Recorder
VR-609
MACHINE ID : 1
Switch 8 : OFF
(RX TERM)
Monitor
MACHINE ID : 2
Switch 8 : OFF
(RX TERM)
MACHINE ID : 9
Switch 8 : ON
(RX TERM)
AC 24 V
power supply
AC 24 V
power supply
TK-C676 or
TK-C655
TK-C676 or
TK-C655
Recommended Cameras:
Manufacturer
Model
JVC
TK-C676
TK-C655
JVC